热99精品只有里视频

<strike id="ogwmj"></strike>
<code id="ogwmj"><sup id="ogwmj"></sup></code>

    <object id="ogwmj"><sup id="ogwmj"><mark id="ogwmj"></mark></sup></object><del id="ogwmj"><small id="ogwmj"></small></del>
  • <big id="ogwmj"><nobr id="ogwmj"></nobr></big>
    1. solutions for structural steel fabricators solutions for structural steel fabricators solutions for structural steel fabricators
      Products

      Project TOOL AND DIES

      Dake Horizontal Band Saw Utility

      Dake Horizontal Band Saw Utility

      Dake Horizontal Band Saw Utility

      Dake Horizontal Band Saw Utility

      Dake Horizontal Band Saw Utility

      Dake Horizontal Band Saw Utility

      PROJECT TOOL AND DIES

      PUNCHES AND DIES CLEVELAND PUNCH AND DIE COMPANY

      Using specific tool and dies, fabricators can utilize ironworkers, hydraulic presses, and punch presses to do simple notching operations

      Project tool and die manufactures a range of notching tool and dies. Notching is an accurate and economical way for the fast and speedy end preparation of tubing or pipe.

      Notches will be virtually distortion free (ideal for silver soldering or brazing.)

      Punch will notch from inside out. Tubing or pipe will be supported by accurately contoured die-sections.

      For first cut slip tubing or pipe over punch, then cycle press. For second cut rotate tubing or pipe 180°. Line up first cut with punch and outside contour with die-section, then recycle press. No extra finishing will be required.

      Tool and dies available to punch multiple, simultaneous slots, holes and notches into all types of tubing.


      Call the Ocean Machinery sales team TODAY at (954) 956-3131 or Toll Free 1 (800) 286-3624 or fill out our online info request form for more information on the TOOL AND DIE TOOL AND DIES.

       

      热99精品只有里视频
      <strike id="ogwmj"></strike>
      <code id="ogwmj"><sup id="ogwmj"></sup></code>

      <object id="ogwmj"><sup id="ogwmj"><mark id="ogwmj"></mark></sup></object><del id="ogwmj"><small id="ogwmj"></small></del>
    2. <big id="ogwmj"><nobr id="ogwmj"></nobr></big>